Difference between revisions of "O2k-Main Unit"

Latest revision as of 12:05, 14 April 2021

O2k-Main Unit

MitoPedia O2k and high-resolution respirometry: O2k-Open Support

Description

The O2k-Main Unit is a component of the O2k-Core. The O2k-Main Unit consists of functionally defined, integral elements, the (O2k-Main Basic, O2k-Peltier Temperature Control, two O2k-Electromagnetic Stirrer Twin-Control units, two O2k-Amperometric OroboPOS Twin-Channels, O2k-Barometric Pressure Transducer), which cannot be obtained separately.

Reference: Oroboros O2k

The O2k-Main Unit consists of integral elements, which are not separately available:

O2k series and support of O2k-Modules

» O2k series

MitoPedia O2k and high-resolution respirometry: O2k hardware, O2k-Open Support, O2k-Respirometry, O2k-FluoRespirometry

@@ Line 1: / Line 1: @@
-{{Product
+{{Technical support}}
-|description=The '''O2k-Main Unit''' is a component of the [[O2k-Core]]. The O2k-Main Unit consists of functionally defined, integral elements, the ([[O2k-Main Basic]], [[O2k-Peltier Temperature Control]], two [[O2k-Electromagnetic Stirrer Control]] units, two [[O2k-Amperometric OroboPOS Channel]]s, [[O2k-Barometric Pressure Transducer]]), which cannot be obtained separately.
+__TOC__
-|product id=20000
+{{MitoPedia without banner
-|product type=O2k-Core
+|abbr=
-|info=[[O2k-Core]]
+|description=The '''O2k-Main Unit''' is a component of the [[O2k-Core]]. The O2k-Main Unit consists of functionally defined, integral elements, the ([[O2k-Main Basic]], [[O2k-Peltier Temperature Control]], two [[O2k-Electromagnetic Stirrer Twin-Control]] units, two [[O2k-Amperometric OroboPOS Twin-Channel]]s, [[O2k-Barometric Pressure Transducer]]), which cannot be obtained separately.
+|info=[[Oroboros O2k]]
 }}
+__TOC__
 The '''O2k-Main Unit''' consists of integral elements, which are not separately available:
-{{#ask: mainlabel=Title|[[Category:Products]] | [[Product type::O2k-Main Unit]]
+{{#ask: [[Category:Products]] [[Product type::O2k-Main Unit]]
 | ?description
 | ?product id
@@ Line 12: / Line 17: @@
 |sort=product id
 |order=ascending
+|mainlabel=Title
 }}
+== O2k series and support of O2k-Modules ==
+::::» [[O2k series]]
-== O2k-Series ==
-The O2k is continuously developed further to integrate various innovations. While all O2k instruments have the same high standard for measuring respiration, there are differences with respect to:
-* Type of [[Catalogue O2k-Stoppers|stoppers]] and [[O2k-Chamber Holder|chamber holders]] used
-* Type of [[OroboPOS-Connector]]
-* Availability of additional electronic channels for O2k-MultiSensor applications.
-[[Image:Serial_number_sticker_small.JPG|right|200 px|alt= the serial   number of each O2k is printed on a sticker at the rear of the O2k]]
-Therefore it may be necessary to identify the '''Series''' of your O2k.
-The series is specified as the first character of the serial number of the O2k, shown on the label on the rear of the O2k-Main Unit [[MiPNet12.06]].  A serial number B-xxxx or C-xxxx denotes O2k-Series B or C, while D-xxxx denotes an O2k-Series D.
+{{MitoPedia O2k and high-resolution respirometry
+|mitopedia O2k and high-resolution respirometry=O2k hardware, O2k-Open Support, O2k-Respirometry, O2k-FluoRespirometry
+}}
-[[Image:Serial_number_signal_line.png|right|200 px|alt=on-line the serial number is displayed in the signal line ]]
-With DatLab operating connected to the O2k, the serial number of the O2k is displayed:
-* in the right corner of the status line, besides the DatLab version number (bottom).
-[[Image:Serial_number_control_window.png|right|200 px|alt=on-line the serial number is displayed in the signal line ]]
-* in the window caption of the O2k-Control window [F7].
-== Support of O2k-Modules ==
-The O2k [[Electronic-TIP2k Upgrading\O2k-Main Unit Series E|(Series E)]], or O2k [[Electronic-TIP2k Upgrading\O2k-Main Unit Series A-D|(Series A-D)]] requires the [[O2k-Catalogue: O2k-MultiSensor\Electronic Upgrading|O2k-MultiSensor electronic upgrade]]. An exception is the application of an NO sensor in a single chamber of the Series A to C O2k.
-== Power supply cable ==
-The O2k is delivered with one of three different types of power supply cables:
-* US type ([[O2k-Main Power Cable\120 V\US-CA]], 21112-01)
-* European type ([[O2k-Main Power Cable\230 V\Europe]], 21111-01)
-* Australian Type ([[O2k-Main Power Cable\230 V\AU-NZ]], 21113-01)
-Use 21111-01 O2k-Main Power Cable\230 V\Europe (Hybrid German/French plug CEE 7-7. Type E+F) only for compatible socket. Note that some '''Danish''' sockets also accept the CEE7/7 plugs, but there is '''no grounding''' connection with these plugs because a male ground pin is required on the plug.
-== Control lights ==
-{{Technical support integrated}}
-{{#set:Technical service=Main unit}}
-After switching on the O2k-Main Unit, the control LEDs on the O2k are illuminated.
-* On the left hand side: the lights should be green.
-* On the right hand side: the 'Comm' light should be yellow (before connection to DatLab) or green (after connection to DatLab during data recording).
-* Left and right stirrer: green (stirrers are on and running at set speed); yellow (briefly the stirrers are accelerating after having been switched on); red (stirrers are switched off).
-Should these lights be unlit, you should exchange the fuse on the rear of the O2k-Main Unit where the power cable is plugged in. A spare fuse is supplied with the O2k in the accessory box ([[O2k-Assembly Kit]]). If the 'Comm' light is red, this indicates an electronic problem.