Difference between revisions of "O2k-Main Unit"

Latest revision as of 12:05, 14 April 2021

O2k-Main Unit

MitoPedia O2k and high-resolution respirometry: O2k-Open Support

Description

The O2k-Main Unit is a component of the O2k-Core. The O2k-Main Unit consists of functionally defined, integral elements, the (O2k-Main Basic, O2k-Peltier Temperature Control, two O2k-Electromagnetic Stirrer Twin-Control units, two O2k-Amperometric OroboPOS Twin-Channels, O2k-Barometric Pressure Transducer), which cannot be obtained separately.

Reference: Oroboros O2k

The O2k-Main Unit consists of integral elements, which are not separately available:

O2k series and support of O2k-Modules

» O2k series

MitoPedia O2k and high-resolution respirometry: O2k hardware, O2k-Open Support, O2k-Respirometry, O2k-FluoRespirometry

@@ Line 1: / Line 1: @@
-{{Product
+{{Technical support}}
-|description=The '''O2k-Main Unit''' is a component of the [[O2k-Core]]. The O2k-Main Unit consists of functionally defined, integral elements, the ([[O2k-Main Basic]], [[O2k-Peltier Temperature Control]], two [[O2k-Electromagnetic Stirrer Control]] units, two [[O2k-Amperometric OroboPOS Channel]]s, [[O2k-Barometric Pressure Transducer]]), which cannot be obtained separately.
+__TOC__
-|product id=20000
+{{MitoPedia without banner
-|product type=O2k-Core, Catalogue
+|abbr=
-|info=[[O2k-Core]]
+|description=The '''O2k-Main Unit''' is a component of the [[O2k-Core]]. The O2k-Main Unit consists of functionally defined, integral elements, the ([[O2k-Main Basic]], [[O2k-Peltier Temperature Control]], two [[O2k-Electromagnetic Stirrer Twin-Control]] units, two [[O2k-Amperometric OroboPOS Twin-Channel]]s, [[O2k-Barometric Pressure Transducer]]), which cannot be obtained separately.
+|info=[[Oroboros O2k]]
 }}
-== The '''O2k-Main Unit''' ''consists of'' ==
-These are integral elements, not separately available.
-___TOC___
+__TOC__
-{{#ask: mainlabel=Title|[[Category:Products]] | [[Product type::O2k-Main Unit]]
+The '''O2k-Main Unit''' consists of integral elements, which are not separately available:
+{{#ask: [[Category:Products]] [[Product type::O2k-Main Unit]]
 | ?description
 | ?product id
@@ Line 14: / Line 17: @@
 |sort=product id
 |order=ascending
+|mainlabel=Title
 }}
+== O2k series and support of O2k-Modules ==
+::::» [[O2k series]]
-== O2k-Series ==
-The Oxygraph-2k is continuously evolving. While all O2k instruments have the same high standard for measuring respiration, there are differences with respect to:
-* Type of [[Catalogue O2k-Stoppers|stoppers]] and [[O2k-Chamber Holder|chamber holders]] used
-* Type of [[OroboPOS-Connector]]
-* Availability of additional electronic channels for O2k-MultiSensor applications.
-[[Image:Serial_number_sticker_small.JPG|right|200 px|alt= the serial   number of each O2k is printed on a sticker at the rear of the O2k]]
-Therefore it may be necessary to identify the '''Series''' of your oxygraph.
-The series is specified as the first character of the serial number of the O2k, shown on the label on the rear of the O2k-Main Unit [[MiPNet12.06]].  A serial number B-xxxx or C-xxxx denotes O2k-Series B or C, while D-xxxx denotes an O2k-Series D.
+{{MitoPedia O2k and high-resolution respirometry
+|mitopedia O2k and high-resolution respirometry=O2k hardware, O2k-Open Support, O2k-Respirometry, O2k-FluoRespirometry
+}}
-[[Image:Serial_number_signal_line.png|right|200 px|alt=on-line the serial number is displayed in the signal line ]]
-With DatLab running on-line connected to the O2k, the serial number of the currently connected Oxygraph-2k is displayed:
-* in the right corner of the status line, besides the DatLab version number (bottom).
-[[Image:Serial_number_control_window.png|right|200 px|alt=on-line the serial number is displayed in the signal line ]]
-* in the window caption of the O2k-Control window [F7].
-== Support of O2k-Modules ==
-The Oxygraph-2k [[Electronic-TIP2k Upgrading\O2k-Main Unit Series E|(Series E)]], or O2k [[Electronic-TIP2k Upgrading\O2k-Main Unit Series A-D|(Series A-D)]] requires the [[O2k-Catalogue: O2k-MultiSensor\Electronic Upgrading|O2k-MultiSensor electronic upgrade]]. An exception is the application of an NO sensor in a single chamber of the Series A to C Oxygraph-2k.
-==O2k-Main Unit Technical Service==
-For technical service purposes the term "Main unit" signifies the  main part of the oxygraph excluding all removable parts, especially  [[POS (technical service)]], [[POS connector (technical service)]],  [[glass chamber]], ...
-Situated inside the main unit is most of  the electronics and the entire heating/cooling and steering system. In  case of technical problems this modular approach usually allows to  replace/ service just the affected part avoiding to have to send the  main unit for repair.
-To locate any problem to a specific part please follow these instruction:
-[[Locating a problem]]
-Only  after OROBOROS Instruments ([email protected]) has been contacted  for [[troubleshooting]] and the problem has been located at the main  unit should the main unit be sent to Oroboros instruments for repair.
-Do  not send the main unit without being told to do so by OROBOROS  Instruments, since many problems can be solved without sending the main  unit.
-For sending the main unit (or just transporting the oxygraph) follow the instructions for [[Shipping an oxygraph]].
-{{#set: Technical service=Main unit}}