Description
A Layout in DatLab is a predefined selection of Plots to be displayed at specific Scalings and in a specific order. Any defined graphics Layout can be selected from the Layout menu for defining initial settings for the Plots [Ctrl+F6] and Scaling [F6]. A Layout can be modified and saved under a specific name. In typical standard DatLab graph layouts plots are shown for the left chamber in Graph 1 (top), and for the right chamber in Graph 2 below). During data acquisition, a 30 min time range is frequently used and adjusted to 1 h during the experiment [F6].
Reference: MiPNet19.18C DatLab Guide
MitoPedia O2k and high-resolution respirometry:
DatLab
Layout: O2k-Core
Version: DatLab 7
- 1 Calibration show temp
- 2a Calibration and background
- 2b Calibration and background (high O2)
- ----
- 3a Flux per volume
- 3b Flux per volume (high O2)
- 3c Flux per volume overlap
- 3d Flux per volume overlap (high O2)
- ----
- 4a Specific flux
- 4b Specific flux (high O2)
- 4c Specific flux overlap
- 4d Specific flux overlap (high O2)
- ----
- 5a Flux control ratio
- 5b Flux control ratio (high O2)
- 5c Flux control ratio overlap
- 5d Flux control ratio overlap (high O2)
- ----
- Raw signal