Cookies help us deliver our services. By using our services, you agree to our use of cookies. More information

ADP

From Bioblast
Revision as of 17:33, 4 November 2014 by Gnaiger Erich (talk | contribs)


high-resolution terminology - matching measurements at high-resolution


ADP

Description

Adenosine diphosphate is a nucleotid. In OXPHOS core metabolism, ADP is a substrate of ANT and ATP synthase in the phosphorylation system. ADP is the discharged or low-energy counterpart of ATP. ADP can accept chemical energy by regaining a phosphate group to become ATP, in substrate-level phosphorylation (in anaerobic catabolism), at the expense of solar energy (in photosynthetic cells) or chemiosmotic energy (respiration in heterotrophic cells). ADP is added to mitochondrial preparations at kinetically saturating concentrations to induce the active state for evaluation of OXPHOS capacity.

Abbreviation: D

Reference: MiPNet03.02, MiPNet09.12


MitoPedia methods: Respirometry 


MitoPedia topics: Substrate and metabolite 

Application in HRR

D: ADP (Adenosine 5'diphosphate potassium salt, C10H15N5O10P2K), Merck 117105-1GM (Calbiochem) FW = 501.3; store at 4°C. Recommended due to lower ATP impurities and used in OROBOROS Lab.


Alternative source: Sigma A 5285, 1 g, store at -20 °C; FW = 501.3.

Caution: Chemicals stored in the fridge or freezer should be allowed to reach room temperature before opening.


Preparation of 500 mM ADP stock solution (dissolved in H2O):

1) Weigh 501.3 mg of ADP = 1 mmol ADP
2) Add 1.2 ml H2O (ADP is not dissolved at this stage).
3) Neutralize with 5 N KOH (approx. 450 µl). ADP will dissolve after addition of KOH.
4) Check pH and adjust to 7 if necessary.
5) Adjust final volume to 2 ml and divide into 0.2 ml portions.
6) Store at -80 °C.


Preparation of 500 mM ADP stock solution with 3 mM free Mg2+ (dissolved in H2O):

To keep free [Mg2+] constant during respiration measurement in MiR06 or MiR05, mix ADP with MgCl2 (0.6 mol MgCl2/mol ADP).

MgCl2 (Scharlau MA0036: MgCl2.6H2O, FW = 203.3)

1) Weigh 501.3 mg of ADP = 1 mmol ADP.
2) Add 1.2 ml H2O (ADP is not dissolved at this stage).
3) Neutralize with 5 N KOH (approx. 450 µl). ADP will dissolve after addition of KOH.
4) Add 121,98 mg MgCl2. White precipitate will occur, which will dissolve during 1-2 min stirring on magnetic stirrer at RT.
5) Check pH and adjust to 7 if necessary.
6) Adjust final volume to 2 ml and divide into 0.2 ml portions.
7) Store at -80 °C.


Comment: In some cases it was observed, that after defreezing of the 'ADP-Mg' a white precipitate has formed again. If this is the case we recommend to prepare the ADP stock solution and a MgCl2 solution (0.6 mol MgCl2/mol ADP) seperately and perform a titration of both solutions in immediate succession.


Oxygraph-2k manual titrations MiPNet09.12 O2k-Titrations

  • Titration volume: 4-20 µl using a 25 µl syringe (2 ml O2k-chamber).
  • Final concentration: 1-5 mM.